TOSL Automation and Technology Ltd. is the leading supplier of Steel Pipe, Tubing and Casing (OCTG), Valves and Fittings. We offer the best quality materials from both Asian and Non-Asian manufacturers. TOSL Automation and Technology Ltd. also carry a wide range of Oilfield, Industrial and Hardware products such as Rig and Pump Spares, Angle Iron, Flats, Channels, Beams, Gratings, Sheets/Plates, Bar Round, Cored Bronze, Pipe Wrapping Products, Pipe Clamps, Studs and Gaskets.
Pipes
- Material: Stainless Steel, Carbon Steel, GRF, Malleable Iron
- Coated: Galvanized
- Sizes: ¼” to 8”; Carbon Steel, Malleable Iron; Schedule 40 to 160;
- Standards: API, ASTM standards. From SCH10 up
- Schedule: 8 to 80
- Length: 20ft and 40ft
Valves
- Isolation Valves: Butterfly, Gate, Ball, Globe, Plug
- Standards: API Rating (6D), AWWA,
- Connection: Flanged – (½” to 20”; 150# – 2500# and FF, RF, RTJ) Threaded – Male / Female NPT (1/2” to 4”) Socket Weld and Wafer types
- Material: PVC, Brass, Carbon Steel, Stainless Steel, Malleable Iron
- Actuators: Pneumatic Diaphragm, Handle and Lever
- Pressure Relief Valves: Snap and Modulating Pilot, Stack vent, Backpressure regulator, Choke valves, Rupture pin
- Check Valves: Swing (up to 8”) and Piston (up to 2”)
- Needle Valve:
- Curb Valves (3/4” to 2”; with or without locks)
Fittings and Accessories
- Flanges: Blind Screwed, Slip on, Orfice, Lap Joint, Spectacle Bend, Socket Weld, Weld Neck (Sizes up to 28”; Up to 2500#; FF, RF, RTJ; Carbon Steel, Chrome/Moly-1 and Chrome/Moly-6, 304 SS; Schedule 10 through XXH; Standards: A105, A350 LF2, A182 F5, F9, F11)
- Flange Adapters (2” to 12”)
- Joint Rings
- Caps, Coupling, Cross, Elbows, TEE, Union, Plugs, Reducers (1/8” to 4”; Forged Steel, Black Malleable Iron, Stainless Steel 304 and 316, Galvanized CS and Galvanized MI; 3000#, 6000#; Various Sizes from 1/8” to 4”, Threaded or Socket Weld – up to )
- Nipples (1/2” to 4”, 2” to 12” long, TBE and Treaded, Schedule 40 to Schedule 160, Galvanized and Black MI)
- Pipe Clamps – Pipe leak repair (Stainless Steel; Sizes for pipes 2 ½” to 20”)
- Self-Tap Saddle Strap
- Bushings – Hex, (Forged Steel)
- Thread-o-let and Weld-o-let
- Gaskets – Cork, Buna N, Spiral Wound
- Sealant – Grafoil, Flexitallic
- Jointing Sheets
Flanges
- BLIND
- SLIP ON
- WELD NECK (RF, FF, RTJ)
- SCREWED
- SOCKET WELD
- ORIFICE
- LAP JOINT
- SPECTACLE BLIND
- FLANGE ADAPTERS
- JOINT RINGS
Schedules 10 through XXH
A105, High Yield, A350 LF2, A182 F5, F9, F11
o 1/2″ through 48″ – 150#, 300#
o 1/2″ through 36″ – 600#
o 1/2″ through 24″ – 900#, 1500#
o 1/2″ through 8″ – 2500#
Material
- Carbon Steel; Stainless Steel; Chrome/Molly-1 and Chrome/Moly-6
General Hardware
- Angle Iron and Flats
- Beams and Channels
- PVC Fittings
Gratings
- Steel
- Banded and Unbanded
- Fibre Glass
- GRP
- Marine
- Stair Threads
- Handrails
Metal Products
- Sheets/Plates:
- Steel
- Brass
- Bronze
- Galvanized
- Zinc
- Stainless Steel
- Bar Round/Solid
- Cored Bronze
- Hollow Cast Iron
- Bright Mild Steel Round
- Cored Cast Iron
Other
- Pipe Coating Products (Polyken)
- Pipe Clamps
- Gaskets
- Studs and Nuts